| HOW TO ORDER | |
|
Epoch Industries’ part numbering system was designed to make it easy for our customers to place an order. There are two formats for part numbers depending on whether the roll is a dead or live shaft roll. Both part numbers begin by specifying the roll type using the letter codes shown below. SA - Standard Aluminum
DEAD SHAFT IDLER ROLLS PART NO. : XX-RD-SD-RF-OS
The first part of the number is the letter
code designating the type of roll being ordered. "RD" is the Roll
Diameter, "SD" is the Shaft Diameter, "RF" the Roll Face, and "OS" the
Operating Speed. So our example is used for ordering a Standard Aluminum
roll with a 5.0" diameter, a 1.25" diameter shaft, a 65.0" Roll Face, and
an Operating Speed of 1500 F.P.M.
LIVE SHAFT IDLER ROLLS PART NO. : XX-RD-RF-OAL-OS
As with the dead shaft part number, live
shaft part numbers begin with the letter code designating the type of roll
being ordered. "RD" is the Roll Diameter, "RF" the Roll Face, "OAL"
is the OverAll Length, and "OS" the Operating Speed. So the example
is specifying a Standard Aluminum Live shaft roll, with a 3.0" Roll Diameter,
a 67.5" Roll Face, and Overall Length of 72.0" and an Operating Speed of
650 F.P.M.
|